Press Releases
Cimatron Continues Focus on Helping Toolmakers and Manufacturers with CimatronE Version 8.5
Apr. 14, 2008
New CAD/CAM Features and Expanded Support for Concurrent Design and Manufacturing Help Optimize Production Processes

Givat Shmuel, Israel – April 14, 2008 – Cimatron Limited (NASDAQ: CIMT) a leading provider of integrated CAD/CAM solutions for the toolmaking and manufacturing industries, announced the general availability of the newly released CimatronE 8.5.

Cimatron’s CAD/CAM solutions address the entire process—from quoting through design, engineering changes, NC, and EDM programming to delivery—helping tool makers and manufacturers deliver higher quality tools and products at lower costs and shorter cycle times.

“The new version of CimatronE is another step in our ongoing effort to help toolmakers and manufacturers become more competitive by shortening production cycles and reducing manufacturing costs,’’ said Danny Haran, Cimatron’s CEO and President.  

CimatronE Version 8.5 incorporates over one thousand product enhancements, including:

Concurrent Engineering

Cimatron’s concurrent engineering capabilities improve productivity and collaboration and significantly compress product delivery times. 

Concurrent design capabilities are built into Cimatron’s CAD applications, enabling multiple users to simultaneously work on the same assembly and shorten the design cycle.  Starting with version 8.5, these concurrent design capabilities are available throughout the entire Cimatron CAD product line. 

Cimatron’s support for concurrent engineering extends beyond the design phase.  The integrated end-to-end design-to-manufacturing solution uses a single database that provides complete associatively and enables multiple steps of the design and manufacturing process to be performed in parallel.

Streamlined Numerical Control

Modified NC Setup Reports: Automatically-generated NC reports facilitate the information flow between NC programmers and the shop floor, providing machine operators with detailed information that includes the tool paths, procedures, tools, and parameters for each job.  Images and user-specific information can be added to the reports, which can be presented either online or in print. 

Automated Drill:  New operations added to the Automated Drill application include profiling of holes and threading cycles, as well as pocketing for pre-drill preparation of difficult to drill areas such as slanted surfaces. These operations can be integrated into the automated drill sequence and reused from libraries to increase efficiency and accuracy.

5-Axis Production: CimatronE version 8.5 features new enhancements to the 5-Axis Production application, including spiral cut milling, 3-5 Axis transformations, and advances in impeller roughing.

Integrated CADENAS Catalogs

CADENAS PARTsolutions is now integrated into CimatronE 8.5, enabling tool makers to shorten design cycles by incorporating ready-made CADENAS catalog parts into Cimatron tool assemblies.

While the catalog functionality has long been available in Cimatron’s software, the CADENAS catalogs place thousands of new standard components at the disposal of Cimatron users, eliminating many of the manual and time-consuming steps in the tool design process.

New Advanced Die Design Capabilities

Creating intermediate binder blanking surfaces and unfolding the part on these faces is one of the most challenging tasks in the die design process.  In most cases, accurate results can only be achieved after a laborious and expensive trial and error process.

Based on a finite element analysis, Cimatron’s "blank on binder" enables the user to perform this task and unfold freeform shapes onto a 3D geometry with unprecedented speed and accuracy. 


About Cimatron

With more than 25 years of experience and over 20,000 installations worldwide, Cimatron is a leading provider of integrated, CAD/CAM solutions for mold, tool and die makers as well as manufacturers of discrete parts. Cimatron is committed to providing comprehensive, cost-effective solutions that streamline manufacturing cycles, enable collaboration with outside vendors, and ultimately shorten product delivery time. Cimatron’s cutting-edge CAD/CAM solutions are widely used in the automotive, medical, consumer plastics, electronics, and other industries. For more information, please visit http://www.cimatron.com

Founded in 1982, Cimatron is publicly traded on the NASDAQ exchange under the symbol CIMT. Cimatron’s subsidiaries and extensive distributor network are located in over 35 countries to serve customers worldwide with complete pre- and post-sales support. For more information, please visit http://www.cimatron.com.


This press release includes forward looking statements, within the meaning of the Private Securities Litigation Reform Act Of 1995, which are subject to risk and uncertainties that could cause actual results to differ materially from those anticipated. Such statements may relate to the company’s plans, objectives and expected financial and operating results. The words "may," "could," "would," “will,” "believe," "anticipate," "estimate," "expect," "intend," "plan," and similar expressions or variations thereof are intended to identify forward-looking statements. Investors are cautioned that any such forward-looking statements are not guarantees of the future performance and involve risks and uncertainties, many of which are beyond the company’s ability to control. The risks and uncertainties that may affect forward looking statements include, but are not limited to: currency fluctuations, global economic and political conditions, marketing demand for Cimatron products and services, long sales cycle, new product development, assimilating future acquisitions, maintaining relationships with customers and partners, and increased competition. For more details about the risks and uncertainties of the business, refer to the Company’s filings with the Securities and Exchanges Commission. The company cannot assess the impact of or the extent to which any single factor or risk, or combination of them, may cause. Cimatron undertakes no obligation to publicly update or revise any forward looking statements, whether as a result of new information, future events or otherwise.

For More Information Contact:


Idit Pass Lagziel
Marketing Manager
Cimatron Ltd.
Phone: +972 3 5312098
Email: iditp@cimatron.com

Ilan Erez
Chief Financial Officer 
Cimatron Ltd. 
Phone: +972 3 531 2121
Email: ilane@cimatron.com 

Yael Nevat
Commitment-IR.com 
Phone: +972 3 611 4466
  +972 50 762 6215
Email: yael@commitment-IR.com


 

Back to List [Next]